Galvanized Combi Nuts / Wing Nuts for Formwork

Combi Nuts or Wing Nuts together with the 15/17 Discontinuous Thread Dywidag Tie Rods or tiebars are used to keep the formwork together, when concrete is poured.

The articulation of the wing nut is approx. 5°.

Dywidag Discontinuous Thread Formwork Tie Rods

Weldable Dywidag Discontinuous Thread Formwork Tie Rods or Formties are used in construction to tie the formwork together. Combi nuts or Tie nuts are screwed on to the tie rods, to keep the formwork in place.

Our Dywidag tie rods have a discontinuous thread and is therefor a self cleansing tie rod. Concrete is removed from the rod, when the tie nut is removed from the tie rod.

We will cut to length on request.

Tie Rod Wrenches

The Tie Rod Wrench or Tie rod Wrenches are used to hold the Dywidag Tie Rod, in place, while the tie nut or Combi Nut is being tied on the formwork.

The Tie rod wrenches can be used on both the 15/17 and 20/23 Dywidag Tie Rods..

Formwork and Scaffolding Accessories
We supply formwork and scaffolding accessories, to the Formwork and scaffolding industries, such as:
1.   Base Jack Nuts for Scaffolding
2.   Base Jacks for Scaffolding
3.   Ferrule dollies for light Formwork
4.   Ferrule Jacks for Light Formwork
5.   Swivel Couplers for Scaffolding
6.   Fixed Couplers for Scaffolding
7.   T Bolts for Scaffolding Couplers
8.   Tie Rods for Formwork
9.   Corner Fillets with lip for Formwork economy panels
10. Chamfer with lip for Formwork economy panels
11. Plain Chamfer for Formwork economy panels
12. Water Stoppers for Formwork

Rebar Processing Equipment and Rebar Accessories
We also supply a wide range of rebar processing equipment and accessories, to the rebar processing and rebar placement industries, such as these Rebar Cutters:
1.   DC-16LZ Rebar Cutter - 220V
2.   DC-16W Rebar Cutter - 220V
3.   DC-20HL Rebar Cutter - 220V
4.   DC-20W Rebar Cutter - 220V
5.   DC-20WH Rebar Cutter - 220V
6.   DC-25X Rebar Cutter - 220V
7.   DC-25W Rebar Cutter - 220V
8.   DC-32WH Rebar Cutter - 220V
9.   M26 Rebar Cutter - 380V
10. M36 Rebar Cutter - 380V
11. M45 Rebar Cutter - 380V
12. MG20H Rebar Cutter - 220V

and these Rebar Benders:
1.   DBD-16L Rebar Bender - 220V
2.   DBD-25H Rebar Bender - 220V
3.   DBD-32X Rebar Bender - 220V
4.   B26 Rebar Bender - 380V
5.   B36 Rebar Bender - 380V
6.   B45 Rebar Bender - 380V
7.   MG20B Rebar Bender - 220V

and Combination Rebar Cutters and Benders:
1.   Manual Rebar Cutter Bender
2.   Mobile Rebar Cutter Bender - Powered by own generator.
3.   DBC-16H Rebar Cutter Bender - 220V
4.   DBC-25X Rebar Cutter Bender - 220V
5.   MG20HB Rebar Cutter Bender - 220V